Get in Touch with Mackayhairscissors Company
We use submitted details to respond to your quote request. Read our Privacy Policy.
Hair Scissors OEM & Private Label Manufacturer
Launch or scale your own line of professional shears, built in our own factory, marked honestly, shipped with your logo. Low minimums, genuine Japanese steel, published hardness.
Choosing a hair scissors OEM manufacturer is a sourcing decision, not a shopping one, you’re buying a factory’s process, its steel traceability, and its honesty about where the work is done. Mackay Hair Scissors (house line MATSUOPRO) is a vertically integrated shear factory serving brand owners, distributors, salons, and academies in 40+ countries since 2014.
We forge from Japanese steel, hand-finish every premium blade in China, publish the Rockwell hardness for each grade, and mark country of origin the way the law requires. Nothing critical is outsourced. That control is what lets us put your name on a professional-grade edge without the guesswork most private-label buyers dread.
From Japanese Steel to Your Brand, What We Control In-House
Most sourcing risk in this category is hidden: unnamed steel, an unpublished hardness, an origin claim that fails the first customs check. A private-label program built on those gaps is expensive to fix once product is in a customer’s hands, because the mistake surfaces after you’ve already paid for tooling and freight.
We remove that risk because we control every stage in-house, Mackay engineers the whole chain rather than brokering it. Raw Japanese steel enters one of our two factories; a finished, hand-honed, logo-engraved, boxed shear leaves. Our mold and tooling shop is in-house across Guangzhou and Zhangjiagang, so a private mold and a from-scratch design never leave the building. Unlike a trading company that sub-contracts each step, we run 80+ steps and 60+ machines under one roof, hardened and ground to a documented spec.
HOVER TO REVEAL STATEMENT
“We control the mold shop, the heat-treat furnaces, and the honing benches in the same building. When a client asks why one pair holds an edge longer, we can point to the exact grade and the exact hardness lot, because we ran it.”
— Mackay Hair Scissors Engineering Team
The Steel-to-Shipped Build Blueprint
Eight accountable stages, each one owned by us, not a subcontractor. This is the chain your brand’s quality actually depends on.
-
01.
Steel intake & verification
genuine Japanese steel (VG10, ATS-314, Japanese 440C) plus 440C and 9CR options, checked on arrival with mill documentation.
-
02.
CNC cutting & forming
repeatable blade geometry, not hand-guessed profiles.
-
03.
Vacuum + cryogenic heat treatment
hardened to a documented HRC per grade (55–62), then cryo-tempered for edge retention.
-
04.
CNC grinding & hand-honing
a Japanese convex edge, finished by hand to a mirror polish.
-
05.
Surface finishing
PVD/titanium coating, polishing, custom colors.
-
06.
Assembly & hand-tensioning
ball-bearing pivot tuned for smooth, balanced action (~45–48 g).
-
07.
Piece-by-piece QC
sharpness, balance, tension, and finish checked one pair at a time, with pre-shipment photos and video.
-
08.
Engraving, packaging & origin marking
your logo and packaging, marked with country of origin to the destination’s rules.
Vetting us against another china scissor factory?
Request our factory profile & spec sheet →
Private-Label & OEM Programs, From In-Stock + Logo to Full ODM
The mistake most factories make is forcing every buyer through the same high-minimum door, which is why a new brand’s first order so often stalls. That gap is the reason we run tiered programs: you can add your logo to an in-stock model from a single piece, or commission a from-scratch design from just 50 pieces per custom order.
Mackay delivers a clear path for each stage, testing, launching, differentiating, or scaling, because a distributor sourcing 5,000 units and a startup ordering custom hair scissors for the first time don’t have the same needs. The matrix below is the decision competitors keep behind a “contact us” form.
The Private-Label Readiness Matrix
Your stage
Best program
Typical MOQ
Sampling path
Design / mold ownership
What you provide
Testing a concept (new brand)
In-stock model + your logo
1 pc (stock)
Buy a stock pair, add engraving
Shared stock design; your logo is yours
Logo artwork (vector)
Launching a line (growing brand)
Semi-custom: pick steel, handle, finish, color
50 pcs / custom order
Existing style sampled, then confirmed
Your color/finish combo; shared base geometry
Logo + finish/color spec + sizes
Differentiating (established brand / distributor)
Full ODM: sketch → CAD → prototype
50 pcs+ per model
(100–200 for colored / left-handed)
(100–200 for colored / left-handed)
Sketch → CAD → private prototype
Private mold dedicated to your design, held under NDA
Concept/sketch + brand + target market
Scaling a catalog (multi-SKU)
Mixed program across steel tiers
Per-model MOQ, blended
Batch sampling by tier
Per-model ownership terms in your OEM agreement
SKU plan + packaging spec + FBA data
MOQ figures are our standard tiers; exact per-model minimums and lead times are confirmed on your quotation.
Custom Options, Steel, Blade, Handle, Size, Finish, Engraving & Packaging
As a hair scissors manufacturer we produce hairdressing scissors, barber shears, thinning and texturizing shears, and professional hair cutting scissors, from 5.0 to 6 inch and up, for hairdressers, stylists, and salons in 40+ countries. Full ODM means every touchpoint of the shear is a variable you control, but “we can do anything” is a trap: a random catalog confuses buyers and inflates your inconsistent inventory risk. The right call is to map each option to a real grade, a real hardness, and a real use case for the professional hairdressing market.
Steel & hardness (published per grade)
Steel tier drives edge life and price more than any other choice, which is the reason we publish it. Every hair cutting shear leaves our line with a documented Rockwell figure, and each grade sits inside the industry’s HRC bands, the precision that lets a distributor defend the spec to a demanding stylist.
Grade
Documented HRC (Mackay)
Character
Best-fit tier
9CR18
55–57
Corrosion-resistant, easy to service
Economy / student lines
SUS 440C
56–58
Carbon-rich, tough all-rounder
Value professional
Japanese 440C
58–60
Cleaner melt, finer edge
Mid professional
VG10 (genuine Takefu)
60–62
Higher edge retention, “SuperSteel”
Premium
ATS-314 (Proterial)
60–62
Cobalt/vanadium, tough + long edge
Flagship
Here’s the counter-intuitive part buyers get wrong: a higher tier isn’t always the better buy. Independent shear reviewers note ATS-314 holds an edge comparably to VG10 while staying tougher and easier to re-sharpen, and 440C at 58–60 HRC serves most working stylists well. We help you pick the tier your market actually pays for.
Blade, handle, size, finish & engraving
- Blade type straight cutting, thinning, texturizing, left-handed (true reversed geometry), and swivel, plus custom grooming shears for pet lines.
- Size range 4.5″, 5.0″, 5.5″, 6.0″, 6.5″, 7.0″, 7.5″ — matched to barbers, stylists, and groomers.
- Handle ergonomic offset to reduce thumb/wrist strain; balanced at roughly 45–48 g.
- Finish PVD/titanium colors, matte black, rainbow, rose gold, mirror polish.
- Engraving laser logo and tang stamp on custom logo hair scissors, blade face, hollow side, or screw cap; the same line covers engraved hair shears for gift and retail SKUs.
- Packaging leather pouch, gift box, barcodes, and Amazon FBA labeling to your spec.
For a deeper metallurgy breakdown of each grade, see our scissor steel guide and Japanese steel hair shears hub.
What a Transparent Factory-Direct OEM Partner Looks Like
Opaque sourcing is where private-label money quietly leaks, a vague quote today becomes a delay, a re-order that doesn’t match, or a compliance gap at the border. Rather than tell you what other suppliers hide, here’s a checklist of what a factory should put in writing before you commit a purchase order.
Every row is something Mackay publishes or provides on request, because a claim you can’t verify is a claim you shouldn’t pay for. You can hold any supplier, including us, to the same standard.
How to Vet Any Hair-Scissor OEM Supplier
The biggest fear here’s committing a brand to an unknown overseas factory, and the risk feels highest around origin. But many scissors are made in China, the real difference is the steel and the finishing, not the flag on the box. The market’s own trade press has debunked the loudest myth: “Japanese steel” describes the steel type, not the country of manufacture, so honest provenance is the correct answer, not a weakness.
Because that gap between perception and fact is where buyers get burned, we turned it into a tool. Mackay engineers this six-point grid so you can score any supplier you shortlist, us included.
-
01
Published hardness + report Can they state HRC per grade and back it with a third-party Rockwell report?
Mackay: yes. -
02
Honest origin Do they mark country of origin correctly and avoid a false “Made in Japan”?
Mackay: Japanese steel, finished and marked in China. -
03
Audited compliance Are the audits real and correctly scoped (a system audit is not a product certification)?
Mackay: BSCI, SGS, ISO 9001, Alibaba Verified. -
04
Transparent MOQ & lead time Is the minimum a real number, and is lead time confirmed in writing at quote?
Mackay: 50/1, confirmed per order. -
05
Pre-shipment QC evidence Do they show photos/video before the container leaves?
Mackay: yes, per order. -
06
IP & design protection Do they sign an NDA, dedicate a private mold, and advise you to register your own brand?
Mackay: yes, details below.
Design and trademark rights are territorial and generally first-to-file, and a supplier’s promise alone isn’t legal protection, a mistake many first-time importers make. So we combine what we can control with honest guidance on what you must do.
-
01
We sign a confidentiality agreement covering your artwork, specifications, and tooling before sampling.
-
02
Your from-scratch designs run on a private mold dedicated to your account, not shared with other clients.
-
03
We advise you to register your trademark and, where relevant, your design in your target market, because that registration, not a factory pledge, is what actually protects you (WIPO, U.S. ITA guidance).
-
04
Exact ownership and exclusivity terms are set in your written OEM agreement, ask us for them before you commit.
Quality You Can Verify, Certifications & Test Reports
“Certified” is a word buyers over-trust, and the risk is that one badge gets stretched to imply things it doesn’t cover. So Mackay separates three different kinds of evidence instead of blurring them, because each answers a different question, and none of them means a shear is a cleared medical device.
These verify how the factory operates, not a specific product. They tell you the plant runs a managed, audited process, hardened by an ISO 9001 quality system across our production lines.
- BSCI
- social compliance audit
- SGS
- independent audit
- ISO 9001
- quality management system
- Alibaba Verified
- supplier check
Unlike a system audit, these are product-level evidence you can attach to your own spec sheet. Mackay provides them per order on request:
- Third-party Rockwell hardness report (per grade)
- Material-composition / mill test certificate
- Salt-spray corrosion test
Where your market requires it, shears can be supplied to meet CE, REACH, RoHS, and California Prop 65 warning requirements. A Prop 65 warning is an exposure-disclosure rule, not a product certification, we scope it to your destination rather than claiming a blanket “certified” status.
CLICK TO EXPAND
CLICK TO EXPAND
CLICK TO EXPAND
CLICK TO EXPAND
CLICK TO EXPAND
CLICK TO EXPAND
CLICK TO EXPAND
OEM Procurement Guide, MOQ, Lead Times, Sampling & Shipping
Two numbers decide most private-label deals: how few you can order, and how long it takes. Every buyer asks the same thing, is it worth it, is it profitable, so we publish the first plainly and treat the second honestly, because a fake “X days” promise is the delay you feel later.
Global-sourcing lead times are variable by nature, and industry procurement data shows supplier delivery times swing with demand, so we quote them per order rather than pretending one figure fits every job. Mackay confirms the window against these drivers:
Factor
How it moves lead time
Program type
In-stock + logo is fastest; full ODM with a new mold is longest.
Steel grade & finish
Premium grades and PVD/custom colors add process steps.
Order volume & SKU count
Larger, multi-SKU runs schedule across our two production sites.
Sampling rounds
Each approval cycle on a new design adds time before bulk.
Freight mode
Air vs sea, and your Incoterm, sets transit on top of production.
We confirm a firm sample and production window in your quotation once these are set.
A factory price isn’t what a shear costs on your shelf, and treating FOB as landed is the hidden mistake that erases a margin. Before you compare quotes for wholesale hair scissors or private label hair scissors wholesale orders, build the full stack:
Cost layer
What it covers
FOB unit price
The shear, your customization, engraving, packaging
Freight & insurance
Sea or air, per your Incoterm (EXW / FOB / CIF / DDP)
Duty & import fees
Tariff on the commodity code for your country
Origin marking & compliance
Country-of-origin marking (legally required) + any labeling
- Custom orders from 50 pieces; colored or left-handed runs typically 100–200 pieces.
- In-stock styles with your logo from a single piece.
- Samples: existing styles are sampled first; new designs go sketch → CAD → prototype before any bulk run.
Even with the full landed stack, premium shears commonly retail at roughly three times their factory cost, and hair-goods private label typically runs a 2–2.5× wholesale markup, the headroom that makes an own-brand line worth building. And because professionals fear a favorite pair being ruined by knife sharpeners or inexperienced hands, we back every order: a dedicated account manager from quote to delivery, a manufacturing-defect warranty, spare parts, a factory re-sharpening service, and a response within 12–24 hours.
OEM & Private Label Planning Tools
Data-driven calculators and decision matrices to evaluate steel grades, model landed margins, and match your volume to the appropriate production program.
Put your name on a professional-grade edge
Tell us your stage, target market, and the styles you’ve in mind. We’ll match a program, a steel tier, and an honest quote, sample first, bulk when you’re ready.
Frequently Asked Questions
Still deciding?
Request a sample pair and a custom quoteYes. We laser-engrave your logo and tang stamp, and supply your packaging, barcodes, and FBA labeling. In-stock models take your logo from a single piece; full private-label designs run from 50 pieces per custom order.
Custom orders start at 50 pieces, colored or left-handed runs at 100–200, and in-stock styles at a single piece with your logo. The genuinely low minimum is designed for a growing brand testing a market without overpaying for inventory risk.
The steel is genuine Japanese steel, including Takefu VG10 and ATS-314 (Proterial). The shears are hand-finished in China and marked “Made in China,” as import law requires. “Japanese steel” describes the steel type, not the country of manufacture, and we never label our shears “Made in Japan.”
Six tiers from 9CR18 (HRC 55–57) up to VG10 and ATS-314 (60–62), each documented per grade and backed by a third-party Rockwell report on request. Our figures sit inside the industry’s documented hardness bands.
Your from-scratch designs run on a private mold dedicated to your account under a confidentiality agreement. Because design and trademark rights are territorial and first-to-file, we also advise you to register your own brand in your market, that registration is your real protection. Exact ownership and exclusivity terms are written into your OEM agreement.
Yes, Rockwell hardness, material composition, salt-spray corrosion, and mill test certificates are available on request, per order.
They depend on program type, steel and finish, volume, sampling rounds, and freight mode, so we confirm a firm sample and production window in your quotation rather than quoting a one-size figure.
Yes, straight cutting, thinning, texturizing, swivel, and true left-handed (reversed-geometry) shears, in sizes from 4.5″ to 7.5″.
Yes. We produce leather pouches or gift boxes to your spec and apply barcodes and FBA labels, so cartons arrive ready for your channel.
EXW, FOB, CIF, and DDP by sea or air, plus dropshipping. Remember that a factory (FOB) price isn’t your landed cost, duty, freight, and origin marking sit on top.
